Product information
The HPE Aruba Networking CX 6100 48G 4SFP+ Switch (JL676A#ACD) is a managed access switch from the Aruba CX 6100 series for small and medium-sized businesses, offices, and branches. It offers 48 Gigabit Ethernet ports (RJ45, non-PoE) and 4 SFP+ uplinks for 1 or 10 Gigabit Ethernet.
The switching capacity is 176 Gbps. The switch runs AOS-CX and supports VLANs, QoS, IGMP Snooping, Link Aggregation, Spanning Tree, ACLs, DHCP Snooping, ARP Inspection, and static routing. It can be managed via Aruba Central, NetEdit, REST API, command line, web interface, or SNMP.
The switch is designed for 19-inch rack mounting (1U) and has a built-in power supply. This variant (#ACD) is supplied with a Swiss power cable (Type J plug) and is intended for use in Switzerland. Technically, it is identical to the JL676A#ABB variant, which includes an EU power cable with a Schuko plug.
Product Series: HPE Aruba Networking CX 6100 Switch Series
Model: CX 6100 48G 4SFP+ Switch
Part Number: JL676A (or JL676A#ACD depending on region)
GTIN/EAN: 0190017348216 / 190017348216
Product Type: Managed Layer 2/3 Access Switch, 1U
Ports:
- 48 × 10/100/1000BASE-T RJ45
- 4 × 1000BASE-X / 10GBASE-X SFP+ (Uplink)
- 1 × USB-C console port
- 1 × USB Type-A host port
- 1 × out-of-band management port (1GbE RJ45)
PoE:
- PoE support: No (this model is without PoE)
- PoE budget: 0 W
Performance:
- Switching capacity: 176 Gbps
- Forwarding rate: up to 98.6 Mpps
- Latency at 1GbE: approx. 1.9 µs
- Latency at 10GbE: approx. 1.8 µs
- Packet buffer: approx. 12.38 MB
- MAC address table: 8,192 entries
- Jumbo frames: up to 9,216 bytes
Hardware:
- Processor: Dual-core ARM Cortex A9 @ 1,016 MHz
- Memory: 4 GB DDR3
- Flash storage: 16 GB eMMC
- Power supply: fixed integrated
- Fan: fixed integrated (side airflow)
- Power supply redundancy: No
Layer 2 Features:
- VLANs: IEEE 802.1Q
- Active VLANs: up to 4,094
- Link aggregation: LACP / IEEE 802.3ad
- Spanning tree: STP, RSTP, MSTP
- LLDP and LLDP-MED: Yes
- IGMP snooping: IGMP v1/v2/v3
- MLD snooping: MLD v1/v2
- Port mirroring: Yes
- Loop protection: Yes
- Storm control: Yes
Layer 3 Features (Basic L3):
- Static routing: Yes (up to 512 IPv4/IPv6 routes)
- ARP: Yes
- ICMP: Yes
- DHCP relay: Yes
- IPv6 support: Yes
Security:
- IEEE 802.1X: Yes
- MAC authentication: Yes
- RADIUS and TACACS+: Yes
- IPv4/IPv6 ACLs: Yes
- DHCP snooping: Yes
- Dynamic ARP protection: Yes
- IP source guard: Yes
- Control plane policing: Yes
QoS:
- IEEE 802.1p: Yes
- DSCP: Yes
- Queues: 8 per port
- Scheduling: Strict Priority and Weighted Round Robin
- Rate limiting: Yes
- Traffic shaping: Yes
Management:
- Operating system: ArubaOS-CX
- Web GUI: Yes
- CLI: Yes
- REST API: Yes
- Python automation: Yes
- SNMP: v1, v2c and v3
- RMON: Yes
- Aruba Central: Yes
- NetEdit: Yes
- Zero Touch Provisioning: Yes
- Configuration backup and rollback: Yes
- Syslog: Yes
- sFlow: Yes
Power Supply:
- Input voltage: 100–127 V or 200–240 V AC
- Mains frequency: 50/60 Hz
- Power consumption (max.): approx. 44.2 W
- Power consumption (idle): approx. 20.6 W
- PoE budget: 0 W
Dimensions:
- Height: 4.4 cm (1U)
- Width: 44.2 cm
- Depth: approx. 24.7 cm
- Weight: approx. 3.4 kg
Environment:
- Operating temperature: 0 °C to 45 °C
- Storage temperature: -40 °C to 70 °C
- Relative humidity: 15% to 95%, non-condensing
- Maximum operating altitude: up to 3,048 m (with derating from 1,524 m)
- Noise level: approx. 24.6 dB(A)
Certifications:
- CE
- FCC
- IC
- VCCI
- RCM
- KC
- CCC
- RoHS compliant
- WEEE compliant
Manufacturer Warranty:
- HPE Limited Lifetime Warranty (depending on sales region)
The HPE Aruba Networking CX 6100 48G 4SFP+ Switch (JL676A#ACD) is a managed access switch from the Aruba CX 6100 series for small and medium-sized businesses, offices, and branches. It offers 48 Gigabit Ethernet ports (RJ45, non-PoE) and 4 SFP+ uplinks for 1 or 10 Gigabit Ethernet.
The switching capacity is 176 Gbps. The switch runs AOS-CX and supports VLANs, QoS, IGMP Snooping, Link Aggregation, Spanning Tree, ACLs, DHCP Snooping, ARP Inspection, and static routing. It can be managed via Aruba Central, NetEdit, REST API, command line, web interface, or SNMP.
The switch is designed for 19-inch rack mounting (1U) and has a built-in power supply. This variant (#ACD) is supplied with a Swiss power cable (Type J plug) and is intended for use in Switzerland. Technically, it is identical to the JL676A#ABB variant, which includes an EU power cable with a Schuko plug.
Product Series: HPE Aruba Networking CX 6100 Switch Series
Model: CX 6100 48G 4SFP+ Switch
Part Number: JL676A (or JL676A#ACD depending on region)
GTIN/EAN: 0190017348216 / 190017348216
Product Type: Managed Layer 2/3 Access Switch, 1U
Ports:
- 48 × 10/100/1000BASE-T RJ45
- 4 × 1000BASE-X / 10GBASE-X SFP+ (Uplink)
- 1 × USB-C console port
- 1 × USB Type-A host port
- 1 × out-of-band management port (1GbE RJ45)
PoE:
- PoE support: No (this model is without PoE)
- PoE budget: 0 W
Performance:
- Switching capacity: 176 Gbps
- Forwarding rate: up to 98.6 Mpps
- Latency at 1GbE: approx. 1.9 µs
- Latency at 10GbE: approx. 1.8 µs
- Packet buffer: approx. 12.38 MB
- MAC address table: 8,192 entries
- Jumbo frames: up to 9,216 bytes
Hardware:
- Processor: Dual-core ARM Cortex A9 @ 1,016 MHz
- Memory: 4 GB DDR3
- Flash storage: 16 GB eMMC
- Power supply: fixed integrated
- Fan: fixed integrated (side airflow)
- Power supply redundancy: No
Layer 2 Features:
- VLANs: IEEE 802.1Q
- Active VLANs: up to 4,094
- Link aggregation: LACP / IEEE 802.3ad
- Spanning tree: STP, RSTP, MSTP
- LLDP and LLDP-MED: Yes
- IGMP snooping: IGMP v1/v2/v3
- MLD snooping: MLD v1/v2
- Port mirroring: Yes
- Loop protection: Yes
- Storm control: Yes
Layer 3 Features (Basic L3):
- Static routing: Yes (up to 512 IPv4/IPv6 routes)
- ARP: Yes
- ICMP: Yes
- DHCP relay: Yes
- IPv6 support: Yes
Security:
- IEEE 802.1X: Yes
- MAC authentication: Yes
- RADIUS and TACACS+: Yes
- IPv4/IPv6 ACLs: Yes
- DHCP snooping: Yes
- Dynamic ARP protection: Yes
- IP source guard: Yes
- Control plane policing: Yes
QoS:
- IEEE 802.1p: Yes
- DSCP: Yes
- Queues: 8 per port
- Scheduling: Strict Priority and Weighted Round Robin
- Rate limiting: Yes
- Traffic shaping: Yes
Management:
- Operating system: ArubaOS-CX
- Web GUI: Yes
- CLI: Yes
- REST API: Yes
- Python automation: Yes
- SNMP: v1, v2c and v3
- RMON: Yes
- Aruba Central: Yes
- NetEdit: Yes
- Zero Touch Provisioning: Yes
- Configuration backup and rollback: Yes
- Syslog: Yes
- sFlow: Yes
Power Supply:
- Input voltage: 100–127 V or 200–240 V AC
- Mains frequency: 50/60 Hz
- Power consumption (max.): approx. 44.2 W
- Power consumption (idle): approx. 20.6 W
- PoE budget: 0 W
Dimensions:
- Height: 4.4 cm (1U)
- Width: 44.2 cm
- Depth: approx. 24.7 cm
- Weight: approx. 3.4 kg
Environment:
- Operating temperature: 0 °C to 45 °C
- Storage temperature: -40 °C to 70 °C
- Relative humidity: 15% to 95%, non-condensing
- Maximum operating altitude: up to 3,048 m (with derating from 1,524 m)
- Noise level: approx. 24.6 dB(A)
Certifications:
- CE
- FCC
- IC
- VCCI
- RCM
- KC
- CCC
- RoHS compliant
- WEEE compliant
Manufacturer Warranty:
- HPE Limited Lifetime Warranty (depending on sales region)
HPE Aruba Networking CX 6100 48G 4SFP+ Switch – JL676A#ACD, with Swiss power cord (Type J)
- Regular price
- 1.599,99 €
- Sale price
- 1.599,99 €
- Regular price
-
Couldn't load pickup availability