Product information
Product description
The HPE Aruba Networking CX 6000 12G Class4 PoE 2G/2SFP 139W Switch (R8N89A) is a fully managed CX 6000 Series access switch for small and medium-sized enterprise locations, branches, schools, and space-constrained, low-noise environments. It offers 12 Gigabit Ethernet RJ45 ports with PoE+ as well as integrated uplinks (2× 1GbE SFP and 2× 1GbE RJ45) for flexible connectivity to aggregation and core layers.
With a PoE budget of 139 W, the switch powers access points, IP phones, security cameras, and other PoE devices with up to 30 W per port (IEEE 802.3at Class 4). The fanless design enables quiet operation in offices, classrooms, and other noise-sensitive environments.
Technical specifications
Manufacturer: Hewlett Packard Enterprise (HPE) / Aruba Networks
Product Series: HPE Aruba Networking CX 6000 Switch Series
Model: CX 6000 12G Class4 PoE 2G/2SFP 139W Switch
Part Number: R8N89A (or R8N89A#ABB depending on the region)
GTIN/EAN: 0190017541853 / 190017541853
Product Type: Managed Layer 2/3 Access Switch, 1U, fanless
Ports:
- 12 × 10/100/1000BASE-T RJ45 (PoE+)
- 2 × 1000BASE-X SFP (Uplink)
- 2 × 10/100/1000BASE-T RJ45 (Uplink)
- 1 × USB-C console port
- 1 × USB Type-A host port
- 1 × out-of-band management port (1GbE RJ45)
PoE:
- Standards: IEEE 802.3af (PoE) and IEEE 802.3at (PoE+)
- PoE class: Class 4
- Maximum power per port: 30 W
- PoE budget: 139 W
- PoE ports: all 12 RJ45 downlink ports
- PoE prioritization: Yes
- PoE scheduling: Yes
Performance:
- Switching capacity: 32 Gbps
- Forwarding rate: up to 23.8 Mpps
- Latency at 1GbE: approx. 2.3 µs
- Packet buffer: approx. 12.38 MB
- MAC address table: 8,192 entries
- Jumbo frames: up to 9,216 bytes
Hardware:
- Processor: Dual-core ARM Cortex A9 @ 1,016 MHz
- Memory: 4 GB DDR3 (platform dependent)
- Flash storage: 16 GB eMMC
- Power supply: integrated
- Fan: No (fanless)
- Power supply redundancy: No
Layer 2 features:
- VLANs: IEEE 802.1Q
- Active VLANs: up to 4,094
- Link aggregation: LACP / IEEE 802.3ad
- Spanning tree: STP, RSTP, MSTP
- LLDP and LLDP-MED: Yes
- IGMP snooping: IGMP v1/v2/v3
- MLD snooping: MLD v1/v2
- Port mirroring: Yes
- Loop protection: Yes
- Storm control: Yes
Layer 3 features (Basic L3):
- Static routing: Yes
- RIP: Yes (depending on firmware)
- ARP: Yes
- ICMP: Yes
- DHCP relay: Yes
- Policy-based routing: limited
Security:
- IEEE 802.1X: Yes
- MAC authentication: Yes
- RADIUS and TACACS+: Yes
- IPv4/IPv6 ACLs: Yes
- DHCP snooping: Yes
- Dynamic ARP protection: Yes
- IP source guard: Yes
- Control plane policing: Yes
QoS:
- IEEE 802.1p: Yes
- DSCP: Yes
- Queues: 8 per port
- Scheduling: Strict Priority and Weighted Round Robin
- Rate limiting: Yes
- Traffic shaping: Yes
Management:
- Operating system: ArubaOS-CX
- Web GUI: Yes
- CLI: Yes
- REST API: Yes
- Python automation: Yes
- SNMP: v1, v2c and v3
- RMON: Yes
- Aruba Central: Yes
- NetEdit: Yes
- Zero Touch Provisioning: Yes
- Configuration backup and rollback: Yes
- Syslog: Yes
- sFlow: Yes
Power supply:
- Input voltage: 100–127 V or 200–240 V AC
- Mains frequency: 50/60 Hz
- Power consumption without PoE: approx. 20–22 W
- PoE budget: up to 139 W
- Maximum total power consumption: approx. 165–170 W
Dimensions:
- Height: 4.4 cm (1U)
- Width: 25.4 cm
- Depth: 25.5 cm
- Weight: approx. 2.8 kg
Environment:
- Operating temperature: 0 °C to 40 °C
- Storage temperature: -40 °C to 70 °C
- Relative humidity: 5% to 95%, non-condensing
- Maximum operating altitude: up to 3,048 m
- Noise level: Fanless (very quiet)
Certifications:
- CE
- FCC
- IC
- VCCI
- RCM
- KC
- CCC
- RoHS compliant
- WEEE compliant
Manufacturer warranty:
- HPE Limited Lifetime Warranty (depending on sales region)
Product Series: HPE Aruba Networking CX 6000 Switch Series
Model: CX 6000 12G Class4 PoE 2G/2SFP 139W Switch
Part Number: R8N89A (or R8N89A#ABB depending on the region)
GTIN/EAN: 0190017541853 / 190017541853
Product Type: Managed Layer 2/3 Access Switch, 1U, fanless
Ports:
- 12 × 10/100/1000BASE-T RJ45 (PoE+)
- 2 × 1000BASE-X SFP (Uplink)
- 2 × 10/100/1000BASE-T RJ45 (Uplink)
- 1 × USB-C console port
- 1 × USB Type-A host port
- 1 × out-of-band management port (1GbE RJ45)
PoE:
- Standards: IEEE 802.3af (PoE) and IEEE 802.3at (PoE+)
- PoE class: Class 4
- Maximum power per port: 30 W
- PoE budget: 139 W
- PoE ports: all 12 RJ45 downlink ports
- PoE prioritization: Yes
- PoE scheduling: Yes
Performance:
- Switching capacity: 32 Gbps
- Forwarding rate: up to 23.8 Mpps
- Latency at 1GbE: approx. 2.3 µs
- Packet buffer: approx. 12.38 MB
- MAC address table: 8,192 entries
- Jumbo frames: up to 9,216 bytes
Hardware:
- Processor: Dual-core ARM Cortex A9 @ 1,016 MHz
- Memory: 4 GB DDR3 (platform dependent)
- Flash storage: 16 GB eMMC
- Power supply: integrated
- Fan: No (fanless)
- Power supply redundancy: No
Layer 2 features:
- VLANs: IEEE 802.1Q
- Active VLANs: up to 4,094
- Link aggregation: LACP / IEEE 802.3ad
- Spanning tree: STP, RSTP, MSTP
- LLDP and LLDP-MED: Yes
- IGMP snooping: IGMP v1/v2/v3
- MLD snooping: MLD v1/v2
- Port mirroring: Yes
- Loop protection: Yes
- Storm control: Yes
Layer 3 features (Basic L3):
- Static routing: Yes
- RIP: Yes (depending on firmware)
- ARP: Yes
- ICMP: Yes
- DHCP relay: Yes
- Policy-based routing: limited
Security:
- IEEE 802.1X: Yes
- MAC authentication: Yes
- RADIUS and TACACS+: Yes
- IPv4/IPv6 ACLs: Yes
- DHCP snooping: Yes
- Dynamic ARP protection: Yes
- IP source guard: Yes
- Control plane policing: Yes
QoS:
- IEEE 802.1p: Yes
- DSCP: Yes
- Queues: 8 per port
- Scheduling: Strict Priority and Weighted Round Robin
- Rate limiting: Yes
- Traffic shaping: Yes
Management:
- Operating system: ArubaOS-CX
- Web GUI: Yes
- CLI: Yes
- REST API: Yes
- Python automation: Yes
- SNMP: v1, v2c and v3
- RMON: Yes
- Aruba Central: Yes
- NetEdit: Yes
- Zero Touch Provisioning: Yes
- Configuration backup and rollback: Yes
- Syslog: Yes
- sFlow: Yes
Power supply:
- Input voltage: 100–127 V or 200–240 V AC
- Mains frequency: 50/60 Hz
- Power consumption without PoE: approx. 20–22 W
- PoE budget: up to 139 W
- Maximum total power consumption: approx. 165–170 W
Dimensions:
- Height: 4.4 cm (1U)
- Width: 25.4 cm
- Depth: 25.5 cm
- Weight: approx. 2.8 kg
Environment:
- Operating temperature: 0 °C to 40 °C
- Storage temperature: -40 °C to 70 °C
- Relative humidity: 5% to 95%, non-condensing
- Maximum operating altitude: up to 3,048 m
- Noise level: Fanless (very quiet)
Certifications:
- CE
- FCC
- IC
- VCCI
- RCM
- KC
- CCC
- RoHS compliant
- WEEE compliant
Manufacturer warranty:
- HPE Limited Lifetime Warranty (depending on sales region)
Product description
The HPE Aruba Networking CX 6000 12G Class4 PoE 2G/2SFP 139W Switch (R8N89A) is a fully managed CX 6000 Series access switch for small and medium-sized enterprise locations, branches, schools, and space-constrained, low-noise environments. It offers 12 Gigabit Ethernet RJ45 ports with PoE+ as well as integrated uplinks (2× 1GbE SFP and 2× 1GbE RJ45) for flexible connectivity to aggregation and core layers.
With a PoE budget of 139 W, the switch powers access points, IP phones, security cameras, and other PoE devices with up to 30 W per port (IEEE 802.3at Class 4). The fanless design enables quiet operation in offices, classrooms, and other noise-sensitive environments.
Technical specifications
Manufacturer: Hewlett Packard Enterprise (HPE) / Aruba Networks
Product Series: HPE Aruba Networking CX 6000 Switch Series
Model: CX 6000 12G Class4 PoE 2G/2SFP 139W Switch
Part Number: R8N89A (or R8N89A#ABB depending on the region)
GTIN/EAN: 0190017541853 / 190017541853
Product Type: Managed Layer 2/3 Access Switch, 1U, fanless
Ports:
- 12 × 10/100/1000BASE-T RJ45 (PoE+)
- 2 × 1000BASE-X SFP (Uplink)
- 2 × 10/100/1000BASE-T RJ45 (Uplink)
- 1 × USB-C console port
- 1 × USB Type-A host port
- 1 × out-of-band management port (1GbE RJ45)
PoE:
- Standards: IEEE 802.3af (PoE) and IEEE 802.3at (PoE+)
- PoE class: Class 4
- Maximum power per port: 30 W
- PoE budget: 139 W
- PoE ports: all 12 RJ45 downlink ports
- PoE prioritization: Yes
- PoE scheduling: Yes
Performance:
- Switching capacity: 32 Gbps
- Forwarding rate: up to 23.8 Mpps
- Latency at 1GbE: approx. 2.3 µs
- Packet buffer: approx. 12.38 MB
- MAC address table: 8,192 entries
- Jumbo frames: up to 9,216 bytes
Hardware:
- Processor: Dual-core ARM Cortex A9 @ 1,016 MHz
- Memory: 4 GB DDR3 (platform dependent)
- Flash storage: 16 GB eMMC
- Power supply: integrated
- Fan: No (fanless)
- Power supply redundancy: No
Layer 2 features:
- VLANs: IEEE 802.1Q
- Active VLANs: up to 4,094
- Link aggregation: LACP / IEEE 802.3ad
- Spanning tree: STP, RSTP, MSTP
- LLDP and LLDP-MED: Yes
- IGMP snooping: IGMP v1/v2/v3
- MLD snooping: MLD v1/v2
- Port mirroring: Yes
- Loop protection: Yes
- Storm control: Yes
Layer 3 features (Basic L3):
- Static routing: Yes
- RIP: Yes (depending on firmware)
- ARP: Yes
- ICMP: Yes
- DHCP relay: Yes
- Policy-based routing: limited
Security:
- IEEE 802.1X: Yes
- MAC authentication: Yes
- RADIUS and TACACS+: Yes
- IPv4/IPv6 ACLs: Yes
- DHCP snooping: Yes
- Dynamic ARP protection: Yes
- IP source guard: Yes
- Control plane policing: Yes
QoS:
- IEEE 802.1p: Yes
- DSCP: Yes
- Queues: 8 per port
- Scheduling: Strict Priority and Weighted Round Robin
- Rate limiting: Yes
- Traffic shaping: Yes
Management:
- Operating system: ArubaOS-CX
- Web GUI: Yes
- CLI: Yes
- REST API: Yes
- Python automation: Yes
- SNMP: v1, v2c and v3
- RMON: Yes
- Aruba Central: Yes
- NetEdit: Yes
- Zero Touch Provisioning: Yes
- Configuration backup and rollback: Yes
- Syslog: Yes
- sFlow: Yes
Power supply:
- Input voltage: 100–127 V or 200–240 V AC
- Mains frequency: 50/60 Hz
- Power consumption without PoE: approx. 20–22 W
- PoE budget: up to 139 W
- Maximum total power consumption: approx. 165–170 W
Dimensions:
- Height: 4.4 cm (1U)
- Width: 25.4 cm
- Depth: 25.5 cm
- Weight: approx. 2.8 kg
Environment:
- Operating temperature: 0 °C to 40 °C
- Storage temperature: -40 °C to 70 °C
- Relative humidity: 5% to 95%, non-condensing
- Maximum operating altitude: up to 3,048 m
- Noise level: Fanless (very quiet)
Certifications:
- CE
- FCC
- IC
- VCCI
- RCM
- KC
- CCC
- RoHS compliant
- WEEE compliant
Manufacturer warranty:
- HPE Limited Lifetime Warranty (depending on sales region)
Product Series: HPE Aruba Networking CX 6000 Switch Series
Model: CX 6000 12G Class4 PoE 2G/2SFP 139W Switch
Part Number: R8N89A (or R8N89A#ABB depending on the region)
GTIN/EAN: 0190017541853 / 190017541853
Product Type: Managed Layer 2/3 Access Switch, 1U, fanless
Ports:
- 12 × 10/100/1000BASE-T RJ45 (PoE+)
- 2 × 1000BASE-X SFP (Uplink)
- 2 × 10/100/1000BASE-T RJ45 (Uplink)
- 1 × USB-C console port
- 1 × USB Type-A host port
- 1 × out-of-band management port (1GbE RJ45)
PoE:
- Standards: IEEE 802.3af (PoE) and IEEE 802.3at (PoE+)
- PoE class: Class 4
- Maximum power per port: 30 W
- PoE budget: 139 W
- PoE ports: all 12 RJ45 downlink ports
- PoE prioritization: Yes
- PoE scheduling: Yes
Performance:
- Switching capacity: 32 Gbps
- Forwarding rate: up to 23.8 Mpps
- Latency at 1GbE: approx. 2.3 µs
- Packet buffer: approx. 12.38 MB
- MAC address table: 8,192 entries
- Jumbo frames: up to 9,216 bytes
Hardware:
- Processor: Dual-core ARM Cortex A9 @ 1,016 MHz
- Memory: 4 GB DDR3 (platform dependent)
- Flash storage: 16 GB eMMC
- Power supply: integrated
- Fan: No (fanless)
- Power supply redundancy: No
Layer 2 features:
- VLANs: IEEE 802.1Q
- Active VLANs: up to 4,094
- Link aggregation: LACP / IEEE 802.3ad
- Spanning tree: STP, RSTP, MSTP
- LLDP and LLDP-MED: Yes
- IGMP snooping: IGMP v1/v2/v3
- MLD snooping: MLD v1/v2
- Port mirroring: Yes
- Loop protection: Yes
- Storm control: Yes
Layer 3 features (Basic L3):
- Static routing: Yes
- RIP: Yes (depending on firmware)
- ARP: Yes
- ICMP: Yes
- DHCP relay: Yes
- Policy-based routing: limited
Security:
- IEEE 802.1X: Yes
- MAC authentication: Yes
- RADIUS and TACACS+: Yes
- IPv4/IPv6 ACLs: Yes
- DHCP snooping: Yes
- Dynamic ARP protection: Yes
- IP source guard: Yes
- Control plane policing: Yes
QoS:
- IEEE 802.1p: Yes
- DSCP: Yes
- Queues: 8 per port
- Scheduling: Strict Priority and Weighted Round Robin
- Rate limiting: Yes
- Traffic shaping: Yes
Management:
- Operating system: ArubaOS-CX
- Web GUI: Yes
- CLI: Yes
- REST API: Yes
- Python automation: Yes
- SNMP: v1, v2c and v3
- RMON: Yes
- Aruba Central: Yes
- NetEdit: Yes
- Zero Touch Provisioning: Yes
- Configuration backup and rollback: Yes
- Syslog: Yes
- sFlow: Yes
Power supply:
- Input voltage: 100–127 V or 200–240 V AC
- Mains frequency: 50/60 Hz
- Power consumption without PoE: approx. 20–22 W
- PoE budget: up to 139 W
- Maximum total power consumption: approx. 165–170 W
Dimensions:
- Height: 4.4 cm (1U)
- Width: 25.4 cm
- Depth: 25.5 cm
- Weight: approx. 2.8 kg
Environment:
- Operating temperature: 0 °C to 40 °C
- Storage temperature: -40 °C to 70 °C
- Relative humidity: 5% to 95%, non-condensing
- Maximum operating altitude: up to 3,048 m
- Noise level: Fanless (very quiet)
Certifications:
- CE
- FCC
- IC
- VCCI
- RCM
- KC
- CCC
- RoHS compliant
- WEEE compliant
Manufacturer warranty:
- HPE Limited Lifetime Warranty (depending on sales region)
HPE Aruba Networking CX 6000 12G Class4 PoE 2G/2SFP 139W – Managed Layer‑2/3‑Switch, 12× 1GbE PoE+, 2× 1GbE SFP + 2× 1GbE RJ45, R8N89A
Hersteller-Nr.
R8N89A#ABB
EAN
0190017541853
- Regular price
- 949,99 €
- Sale price
- 949,99 €
- Regular price
-
Nettopreis: wird berechnet...
Shipping calculated at checkout.
5 in Stock Now
Estimated delivery: 2–4 business days
For in-stock items, shipping to Germany
Couldn't load pickup availability