Product information
The HPE Aruba Networking 2930F 48G PoE+ 4SFP 740W (JL557A) is a managed Layer 3 access switch from the 2930F series for enterprise networks, campuses, and branches with high PoE requirements. It offers 48 Gigabit Ethernet ports with PoE+ (up to 30 W per port) as well as four 1-Gigabit SFP uplinks.
The switching capacity is 104 Gbps, and the forwarding rate is 77.4 Mpps. The switch supports static routing, RIP, Access OSPF, ACLs, QoS, and IPv6. Using VSF (Virtual Switching Framework), up to 8 switches can be combined into a single logical device. The built-in power supply provides a PoE budget of 740 W.
Product Series: HPE Aruba Networking 2930F Series Switches
Model: Aruba 2930F 48G PoE+ 4SFP 740W Switch
Part Number: JL557A#ABB
GTIN/EAN: 0190017219431 / 190017219431
Product Type: Managed Layer 3 Access Switch, stackable, 1U, rackmountable
Ports:
- 48 × 10/100/1000BASE-T RJ45
- 48 × PoE+ (IEEE 802.3at)
- 4 × 100/1000BASE-X SFP (Uplink, fixed integrated)
- 1 × RJ45 console port
- 1 × Micro-USB console port
- 1 × USB Type-A host port (for logging, firmware updates, etc.)
- 1 × out-of-band management port (1GbE RJ45)
PoE:
- Standards: IEEE 802.3af (PoE) and IEEE 802.3at (PoE+)
- Maximum power per port: 30 W (PoE+)
- PoE budget (standard power supply): up to 740 W
- PoE ports: all 48 RJ45 ports
- PoE prioritization: Yes
- Pre-standard PoE: Yes (detection and powering of
legacy PoE devices)
Performance:
- Switching capacity: 176 Gbps
- Forwarding rate: up to approx. 112 Mpps
- Latency at 1GbE: typically < 3.8 µs
- Latency at 10GbE: typically < 1.6 µs (via SFP uplinks)
- Packet buffer: approx. 12.38 MB (platform dependent)
- MAC address table: up to 32,768 entries
- Jumbo frames: up to 9,220 bytes
Hardware:
- Processor: Dual-core ARM Cortex-A9 @ 1,016 MHz
- Memory: 1 GB DDR3 SDRAM
- Flash memory: 4 GB eMMC
- Power supply: fixed integrated (AC)
- Fans: fixed integrated (front-to-back airflow)
- Power supply redundancy: No
Stacking:
- HPE Aruba Virtual Switching Framework (VSF): Yes
- Maximum stack size: up to 8 switches
- Stacking topology: ring or chain
- Stacking bandwidth: dependent on installed SFP modules
and configuration
Layer 2 Features:
- VLANs: IEEE 802.1Q
- Active VLANs: up to 4,094
- Link aggregation: LACP / IEEE 802.3ad
- Spanning Tree: STP, RSTP, MSTP
- LLDP and LLDP-MED: Yes
- IGMP snooping: IGMP v1/v2/v3
- MLD snooping: MLD v1/v2
- Port mirroring: Yes
- Loop protection: Yes
- Storm control: Yes
Layer 3 Features:
- IPv4 and IPv6 routing: Yes
- Static routing: Yes
- RIP and RIPng: Yes
- Access OSPF (OSPFv2/OSPFv3): Yes (1 OSPF area, up to
8 interfaces)
- VRRP and VRRPv3: Yes
- Policy-based routing: No (only on higher-end models)
- ECMP: Yes (static routing)
- DHCP relay: Yes
- DHCP server: limited
Security:
- IEEE 802.1X: Yes
- MAC authentication: Yes
- RADIUS and TACACS+: Yes
- IPv4/IPv6 ACLs: Yes
- DHCP snooping: Yes
- Dynamic ARP protection: Yes
- IP source guard: Yes
- Control plane policing: Yes
- Port security: Yes
- MACsec: No (only on higher-end models)
QoS:
- IEEE 802.1p: Yes
- DSCP: Yes
- Queues: 8 per port
- Scheduling: Strict Priority and Weighted Round Robin
- Rate limiting: Yes
- Traffic shaping: Yes
Management:
- Operating system: ArubaOS Switch (ProVision-based)
- Web GUI: Yes
- CLI: Yes
- REST API: Yes (firmware dependent)
- SNMP: v1, v2c, and v3
- RMON: Yes
- HPE Aruba ClearPass Policy Manager: Yes
- HPE Aruba AirWave: Yes
- HPE Aruba Central: Yes (cloud management)
- Zero Touch Provisioning: Yes
- Configuration backup and rollback: Yes
- Syslog: Yes
- sFlow: Yes
Power Supply:
- Input voltage: 100–127 / 200–240 V AC, 50/60 Hz
- Line frequency: 50/60 Hz
- Power consumption (typical): approx. 98 W (without PoE)
- Power consumption (max.): approx. 980 W (with PoE)
- PoE budget: up to 740 W
Dimensions:
- Height: 4.39 cm (1U)
- Width: 44.25 cm
- Depth: approx. 32.42 cm
- Weight: approx. 4.79 kg (depending on configuration)
Environment:
- Operating temperature: 0 °C to 45 °C
- Storage temperature: -40 °C to 70 °C
- Relative humidity: 15% to 95%, non-condensing
- Maximum operating altitude: up to 3,000 m (with derating)
- Airflow: front-to-back
- Noise level: approx. 50–55 dB(A)
Certifications:
- CE
- FCC
- IC
- VCCI
- RCM
- KC
- CCC
- RoHS compliant
- WEEE compliant
Manufacturer Warranty:
- Limited Lifetime Warranty (depending on sales region)
- Extended support options available through HPE/HPE Aruba Services
The HPE Aruba Networking 2930F 48G PoE+ 4SFP 740W (JL557A) is a managed Layer 3 access switch from the 2930F series for enterprise networks, campuses, and branches with high PoE requirements. It offers 48 Gigabit Ethernet ports with PoE+ (up to 30 W per port) as well as four 1-Gigabit SFP uplinks.
The switching capacity is 104 Gbps, and the forwarding rate is 77.4 Mpps. The switch supports static routing, RIP, Access OSPF, ACLs, QoS, and IPv6. Using VSF (Virtual Switching Framework), up to 8 switches can be combined into a single logical device. The built-in power supply provides a PoE budget of 740 W.
Product Series: HPE Aruba Networking 2930F Series Switches
Model: Aruba 2930F 48G PoE+ 4SFP 740W Switch
Part Number: JL557A#ABB
GTIN/EAN: 0190017219431 / 190017219431
Product Type: Managed Layer 3 Access Switch, stackable, 1U, rackmountable
Ports:
- 48 × 10/100/1000BASE-T RJ45
- 48 × PoE+ (IEEE 802.3at)
- 4 × 100/1000BASE-X SFP (Uplink, fixed integrated)
- 1 × RJ45 console port
- 1 × Micro-USB console port
- 1 × USB Type-A host port (for logging, firmware updates, etc.)
- 1 × out-of-band management port (1GbE RJ45)
PoE:
- Standards: IEEE 802.3af (PoE) and IEEE 802.3at (PoE+)
- Maximum power per port: 30 W (PoE+)
- PoE budget (standard power supply): up to 740 W
- PoE ports: all 48 RJ45 ports
- PoE prioritization: Yes
- Pre-standard PoE: Yes (detection and powering of
legacy PoE devices)
Performance:
- Switching capacity: 176 Gbps
- Forwarding rate: up to approx. 112 Mpps
- Latency at 1GbE: typically < 3.8 µs
- Latency at 10GbE: typically < 1.6 µs (via SFP uplinks)
- Packet buffer: approx. 12.38 MB (platform dependent)
- MAC address table: up to 32,768 entries
- Jumbo frames: up to 9,220 bytes
Hardware:
- Processor: Dual-core ARM Cortex-A9 @ 1,016 MHz
- Memory: 1 GB DDR3 SDRAM
- Flash memory: 4 GB eMMC
- Power supply: fixed integrated (AC)
- Fans: fixed integrated (front-to-back airflow)
- Power supply redundancy: No
Stacking:
- HPE Aruba Virtual Switching Framework (VSF): Yes
- Maximum stack size: up to 8 switches
- Stacking topology: ring or chain
- Stacking bandwidth: dependent on installed SFP modules
and configuration
Layer 2 Features:
- VLANs: IEEE 802.1Q
- Active VLANs: up to 4,094
- Link aggregation: LACP / IEEE 802.3ad
- Spanning Tree: STP, RSTP, MSTP
- LLDP and LLDP-MED: Yes
- IGMP snooping: IGMP v1/v2/v3
- MLD snooping: MLD v1/v2
- Port mirroring: Yes
- Loop protection: Yes
- Storm control: Yes
Layer 3 Features:
- IPv4 and IPv6 routing: Yes
- Static routing: Yes
- RIP and RIPng: Yes
- Access OSPF (OSPFv2/OSPFv3): Yes (1 OSPF area, up to
8 interfaces)
- VRRP and VRRPv3: Yes
- Policy-based routing: No (only on higher-end models)
- ECMP: Yes (static routing)
- DHCP relay: Yes
- DHCP server: limited
Security:
- IEEE 802.1X: Yes
- MAC authentication: Yes
- RADIUS and TACACS+: Yes
- IPv4/IPv6 ACLs: Yes
- DHCP snooping: Yes
- Dynamic ARP protection: Yes
- IP source guard: Yes
- Control plane policing: Yes
- Port security: Yes
- MACsec: No (only on higher-end models)
QoS:
- IEEE 802.1p: Yes
- DSCP: Yes
- Queues: 8 per port
- Scheduling: Strict Priority and Weighted Round Robin
- Rate limiting: Yes
- Traffic shaping: Yes
Management:
- Operating system: ArubaOS Switch (ProVision-based)
- Web GUI: Yes
- CLI: Yes
- REST API: Yes (firmware dependent)
- SNMP: v1, v2c, and v3
- RMON: Yes
- HPE Aruba ClearPass Policy Manager: Yes
- HPE Aruba AirWave: Yes
- HPE Aruba Central: Yes (cloud management)
- Zero Touch Provisioning: Yes
- Configuration backup and rollback: Yes
- Syslog: Yes
- sFlow: Yes
Power Supply:
- Input voltage: 100–127 / 200–240 V AC, 50/60 Hz
- Line frequency: 50/60 Hz
- Power consumption (typical): approx. 98 W (without PoE)
- Power consumption (max.): approx. 980 W (with PoE)
- PoE budget: up to 740 W
Dimensions:
- Height: 4.39 cm (1U)
- Width: 44.25 cm
- Depth: approx. 32.42 cm
- Weight: approx. 4.79 kg (depending on configuration)
Environment:
- Operating temperature: 0 °C to 45 °C
- Storage temperature: -40 °C to 70 °C
- Relative humidity: 15% to 95%, non-condensing
- Maximum operating altitude: up to 3,000 m (with derating)
- Airflow: front-to-back
- Noise level: approx. 50–55 dB(A)
Certifications:
- CE
- FCC
- IC
- VCCI
- RCM
- KC
- CCC
- RoHS compliant
- WEEE compliant
Manufacturer Warranty:
- Limited Lifetime Warranty (depending on sales region)
- Extended support options available through HPE/HPE Aruba Services
HPE Aruba Networking 2930F 48G PoE+ 4SFP 740W – Managed Layer‑3‑Switch, 48× 1GbE PoE+ + 4× 1GbE SFP, VSF, JL557A
- Regular price
- 2.519,99 €
- Sale price
- 2.519,99 €
- Regular price
-
Couldn't load pickup availability
