Product information
The Eaton 9SX 1000i (9SX1000I) is a single-phase online UPS with double conversion for critical IT infrastructures, servers, storage systems, network components and VoIP systems. It offers an apparent power of 1,000 VA and a real power of 900 W (power factor 0.9) at an output voltage of 230 V (adjustable 200–240 V). The device is designed as a tower UPS.
Through the online double conversion, connected devices are continuously supplied via the inverter and thus decoupled from voltage and frequency fluctuations as well as power grid disturbances. The efficiency is up to 89% in online operation and up to 94% in high-efficiency mode.
The 9SX1000I offers six IEC-C13 output sockets as well as a C14 input and features USB, a serial interface (RS-232) and a communication slot for an optional network card. With Eaton Intelligent Power Manager or Intelligent Power Protector, connected systems can be safely shut down during longer power outages. The batteries can be replaced during operation; the runtime can be extended with external battery modules (EBM).
Product series: Eaton 9SX
Model: 9SX1000I
Product type: Online double-conversion UPS (tower)
Power: 1,000 VA / 900 W
Rated output voltage: 230 V (configurable 200/208/220/230/240 V)
Output frequency: 50/60 Hz
Waveform: Pure sine wave
Output connectors: 6 × IEC 320 C13
Input voltage range: 120–276 V (load-dependent)
Input frequency range: 40–70 Hz
Input connector: IEC 320 C14
Input power factor: > 0.99
Batteries: 3 × 12 V / 9 Ah, lead-acid (VRLA)
Hot-swappable battery: Yes
Extendable runtime: Yes, with external battery modules (EBM)
Typical battery life: 3 to 5 years
Interfaces:
- USB, RS-232
- Communication slot (mini-slot) for optional network card (e.g., Eaton Network-M3)
- Remote ON/OFF, remote power off, relay outputs
Management software: Eaton Intelligent Power Manager (IPM), Intelligent Power Protector (IPP)
Display: LCD
Internal bypass: Yes
Form factor: Tower
Dimensions (W × H × D): approx. 160 × 252 × 387 mm
Operating temperature: 0 °C to 40 °C
Relative humidity: 0% to 95%, non-condensing
Certifications: CE, IEC/EN 62040-1, IEC/EN 62040-2, IEC/EN 62040-3
Warranty: according to manufacturer
The Eaton 9SX 1000i (9SX1000I) is a single-phase online UPS with double conversion for critical IT infrastructures, servers, storage systems, network components and VoIP systems. It offers an apparent power of 1,000 VA and a real power of 900 W (power factor 0.9) at an output voltage of 230 V (adjustable 200–240 V). The device is designed as a tower UPS.
Through the online double conversion, connected devices are continuously supplied via the inverter and thus decoupled from voltage and frequency fluctuations as well as power grid disturbances. The efficiency is up to 89% in online operation and up to 94% in high-efficiency mode.
The 9SX1000I offers six IEC-C13 output sockets as well as a C14 input and features USB, a serial interface (RS-232) and a communication slot for an optional network card. With Eaton Intelligent Power Manager or Intelligent Power Protector, connected systems can be safely shut down during longer power outages. The batteries can be replaced during operation; the runtime can be extended with external battery modules (EBM).
Product series: Eaton 9SX
Model: 9SX1000I
Product type: Online double-conversion UPS (tower)
Power: 1,000 VA / 900 W
Rated output voltage: 230 V (configurable 200/208/220/230/240 V)
Output frequency: 50/60 Hz
Waveform: Pure sine wave
Output connectors: 6 × IEC 320 C13
Input voltage range: 120–276 V (load-dependent)
Input frequency range: 40–70 Hz
Input connector: IEC 320 C14
Input power factor: > 0.99
Batteries: 3 × 12 V / 9 Ah, lead-acid (VRLA)
Hot-swappable battery: Yes
Extendable runtime: Yes, with external battery modules (EBM)
Typical battery life: 3 to 5 years
Interfaces:
- USB, RS-232
- Communication slot (mini-slot) for optional network card (e.g., Eaton Network-M3)
- Remote ON/OFF, remote power off, relay outputs
Management software: Eaton Intelligent Power Manager (IPM), Intelligent Power Protector (IPP)
Display: LCD
Internal bypass: Yes
Form factor: Tower
Dimensions (W × H × D): approx. 160 × 252 × 387 mm
Operating temperature: 0 °C to 40 °C
Relative humidity: 0% to 95%, non-condensing
Certifications: CE, IEC/EN 62040-1, IEC/EN 62040-2, IEC/EN 62040-3
Warranty: according to manufacturer
Eaton 9SX 1000i – 1,000 VA / 900 W Online Double-Conversion UPS, Tower
- Regular price
- 916,99 €
- Sale price
- 916,99 €
- Regular price
-
Couldn't load pickup availability