Product information
The Eaton 5PX 3000i RT2U Netpack G2 (5PX3000IRTNG2) is a single-phase line-interactive UPS from the 5PX series (2nd generation) for server rooms, small data centers, servers, storage systems, and network components. It offers an apparent power of 3,000 VA and a real power of 3,000 W (power factor 1.0) at an output voltage of 230 V (adjustable 200–240 V). The device is designed as a rack/tower device with 2 rack units and can be operated in a 19-inch rack or as a tower.
The UPS operates line-interactively and delivers a pure sine wave at the output. The automatic voltage regulation (AVR) compensates for under- and over-voltages without switching to battery operation, and protects connected devices from voltage spikes, mains disturbances, and power outages. In high-efficiency mode, it achieves an efficiency of up to 99%.
The 5PX3000IRTNG2 offers ten output outlets (8 × IEC C13, 2 × IEC C19) as well as a C20 input and comes with a pre-installed network card (Netpack) for SNMP and web management; in addition, it has a USB and serial interface (RS-232). With the Eaton Intelligent Power Manager (IPM) or Intelligent Power Protector software, connected systems are safely shut down during longer power outages. The batteries can be replaced by the user during operation; the runtime can be extended with external battery modules (EBM).
Product Series: Eaton 5PX Gen2 (G2)
Model: 5PX3000IRTNG2
Product Type: Line-Interactive UPS (Rack/Tower, 2U)
Power: 3,000 VA / 3,000 W (Unity Power Factor, PF=1.0)
Nominal Output Voltage: 230 V (configurable 200/208/220/230/240 V ±1 %)
Output Frequency: 50/60 Hz (configurable)
Waveform: Pure Sine Wave
Total Harmonic Distortion (linear load): ≤3 %
Output Connectors:
- 8 × IEC 320 C13 (10 A)
- 2 × IEC 320 C19 (16 A)
- Total: 10 output outlets
Input Voltage: 230 V (configurable 200/208/220/230/240 V)
Input Voltage Range: 160–294 V (adjustable 150–294 V)
Input Frequency: 50/60 Hz (configurable 47–70 Hz)
Input Connector: IEC 320 C20
Input Cable: 1.8 m
Input Power Factor: 1.0
Battery Type: Sealed Lead Acid (VRLA), maintenance-free
Battery Voltage: 12 V
Number of Batteries: 6 × 12 V / 9 Ah
Typical Battery Runtime at Full Load (3,000 W): approx. 3 minutes
Typical Battery Runtime at 50% Load (1,500 W): approx. 9.5 minutes
Typical Battery Service Life: 3 to 5 years
Charging Time: approx. 4–6 hours (up to 90 %)
Hot-Swap Battery: Yes
Extendable Runtime: Yes (via external battery packs, model-dependent)
Interfaces:
- USB (Type B)
- RS-232 (serial, RJ-45)
- Ethernet (integrated network management card, Netpack)
- Expansion Slot for Optional Communication Cards (e.g., SNMP, Modbus, Relay I/O)
Management Software:
- Eaton Intelligent Power Manager (IPM)
- Eaton Intelligent Power Protector
- SNMP/Web Management via Integrated Network Card
- Cloud Monitoring (model-dependent)
Surge Protection: Yes
Protection Features:
- Battery Discharge Protection
- Overload Protection
- Short-Circuit Protection
- Overvoltage Protection
- Undervoltage Protection
- Frequency Deviation Protection
Form Factor: Rackmount / Tower (2U)
Rack Height: 2U (85.5 mm)
Dimensions (H × W × D): 85.5 × 438 × 603 mm
Weight: approx. 31.7 kg
Operating Temperature: 0 °C to 40 °C
Storage Temperature: −15 °C to 45 °C
Relative Humidity during Operation: 0% to 95%, non-condensing
Maximum Operating Altitude: 3,000 m (1,000 m without derating)
Noise Level: <40 dBA (at 1 m distance)
Overall Efficiency: Up to 98%
Certifications: CE, EAC, ENERGY STAR, UL 1778, IEC/EN 62040-1, IEC/EN 62040-2, cULus, CSA 22.2, FCC Part 15 Class B, CISPR22 Class B, CB (TUV), UKCA, Ukr, Cm
Warranty: 3 years (electronics), 2 years (battery)
The Eaton 5PX 3000i RT2U Netpack G2 (5PX3000IRTNG2) is a single-phase line-interactive UPS from the 5PX series (2nd generation) for server rooms, small data centers, servers, storage systems, and network components. It offers an apparent power of 3,000 VA and a real power of 3,000 W (power factor 1.0) at an output voltage of 230 V (adjustable 200–240 V). The device is designed as a rack/tower device with 2 rack units and can be operated in a 19-inch rack or as a tower.
The UPS operates line-interactively and delivers a pure sine wave at the output. The automatic voltage regulation (AVR) compensates for under- and over-voltages without switching to battery operation, and protects connected devices from voltage spikes, mains disturbances, and power outages. In high-efficiency mode, it achieves an efficiency of up to 99%.
The 5PX3000IRTNG2 offers ten output outlets (8 × IEC C13, 2 × IEC C19) as well as a C20 input and comes with a pre-installed network card (Netpack) for SNMP and web management; in addition, it has a USB and serial interface (RS-232). With the Eaton Intelligent Power Manager (IPM) or Intelligent Power Protector software, connected systems are safely shut down during longer power outages. The batteries can be replaced by the user during operation; the runtime can be extended with external battery modules (EBM).
Product Series: Eaton 5PX Gen2 (G2)
Model: 5PX3000IRTNG2
Product Type: Line-Interactive UPS (Rack/Tower, 2U)
Power: 3,000 VA / 3,000 W (Unity Power Factor, PF=1.0)
Nominal Output Voltage: 230 V (configurable 200/208/220/230/240 V ±1 %)
Output Frequency: 50/60 Hz (configurable)
Waveform: Pure Sine Wave
Total Harmonic Distortion (linear load): ≤3 %
Output Connectors:
- 8 × IEC 320 C13 (10 A)
- 2 × IEC 320 C19 (16 A)
- Total: 10 output outlets
Input Voltage: 230 V (configurable 200/208/220/230/240 V)
Input Voltage Range: 160–294 V (adjustable 150–294 V)
Input Frequency: 50/60 Hz (configurable 47–70 Hz)
Input Connector: IEC 320 C20
Input Cable: 1.8 m
Input Power Factor: 1.0
Battery Type: Sealed Lead Acid (VRLA), maintenance-free
Battery Voltage: 12 V
Number of Batteries: 6 × 12 V / 9 Ah
Typical Battery Runtime at Full Load (3,000 W): approx. 3 minutes
Typical Battery Runtime at 50% Load (1,500 W): approx. 9.5 minutes
Typical Battery Service Life: 3 to 5 years
Charging Time: approx. 4–6 hours (up to 90 %)
Hot-Swap Battery: Yes
Extendable Runtime: Yes (via external battery packs, model-dependent)
Interfaces:
- USB (Type B)
- RS-232 (serial, RJ-45)
- Ethernet (integrated network management card, Netpack)
- Expansion Slot for Optional Communication Cards (e.g., SNMP, Modbus, Relay I/O)
Management Software:
- Eaton Intelligent Power Manager (IPM)
- Eaton Intelligent Power Protector
- SNMP/Web Management via Integrated Network Card
- Cloud Monitoring (model-dependent)
Surge Protection: Yes
Protection Features:
- Battery Discharge Protection
- Overload Protection
- Short-Circuit Protection
- Overvoltage Protection
- Undervoltage Protection
- Frequency Deviation Protection
Form Factor: Rackmount / Tower (2U)
Rack Height: 2U (85.5 mm)
Dimensions (H × W × D): 85.5 × 438 × 603 mm
Weight: approx. 31.7 kg
Operating Temperature: 0 °C to 40 °C
Storage Temperature: −15 °C to 45 °C
Relative Humidity during Operation: 0% to 95%, non-condensing
Maximum Operating Altitude: 3,000 m (1,000 m without derating)
Noise Level: <40 dBA (at 1 m distance)
Overall Efficiency: Up to 98%
Certifications: CE, EAC, ENERGY STAR, UL 1778, IEC/EN 62040-1, IEC/EN 62040-2, cULus, CSA 22.2, FCC Part 15 Class B, CISPR22 Class B, CB (TUV), UKCA, Ukr, Cm
Warranty: 3 years (electronics), 2 years (battery)
Eaton 5PX G2 5PX3000IRTNG2 – 3,000 VA / 3,000 W Line-Interactive UPS, 2U Rack/Tower, with Network Management Card
- Regular price
- 2.259,99 €
- Sale price
- 2.259,99 €
- Regular price
-
Couldn't load pickup availability