Product information
The Eaton 5P 650iR Gen 2 Netpack (5P650IRNG2) is a single-phase line-interactive UPS from the 5P series (2nd generation) for small to medium-sized IT environments, network components, servers, storage systems, VoIP phones, and POS systems. It offers an apparent power of 650 VA and a real power of 520 W at an output voltage of 230 V (adjustable from 200 to 240 V). The device is designed as a 1U rack-mount UPS and is installed in a 19-inch rack.
The UPS operates line-interactively and provides a pure sine wave at the output. The automatic voltage regulation (AVR) compensates for under- and over-voltages without switching to battery operation, and protects connected devices from voltage spikes, mains disturbances, and power outages. In high-efficiency mode, it achieves an efficiency of up to 98%.
The 5P650IRNG2 offers four IEC C13 output sockets as well as a C14 input and comes with a pre-installed network card (Netpack) for SNMP and web management; in addition, it features USB and serial interfaces (RS-232). With the Eaton Intelligent Power Manager (IPM) or Intelligent Power Protector software, connected systems are safely shut down during prolonged power outages. The batteries can be replaced by the user during operation.
Product series: Eaton 5P Gen2
Model: 5P650IRNG2 (Netpack)
Product type: Line-interactive UPS (rack, 1U) with network card
Power: 650 VA / 520 W
Rated output voltage: 230 V (configurable 200/208/220/230/240 V)
Waveform: Pure sine wave
Automatic Voltage Regulation (AVR): Yes
Output connections: 4 × IEC 320 C13 (2 switchable groups)
Input voltage range: 160–294 V (adjustable 150–294 V)
Input frequency: 50/60 Hz
Input connection: IEC 320 C14
Batteries: 2 × 6 V / 9 Ah, lead-acid (VRLA), maintenance-free
Hot-swappable battery: Yes
Battery management: Eaton ABM
Typical battery life: 3 to 5 years
Interfaces:
- USB (HID-compatible)
- RS-232 (serial)
- Network card pre-installed (Web, SNMP)
- Remote ON/OFF and remote power off (terminal block), relay outputs
Management software: Eaton Intelligent Power Manager (IPM), Intelligent Power Protector (IPP)
Display: Graphic LCD with energy metering
Form factor: Rackmount, 1U
Dimensions (H × W × D): approx. 43 × 438 × 361 mm
Weight: approx. 8.7 kg
Operating temperature: 0 °C to 40 °C
Relative humidity: 0% to 90%, non-condensing
Efficiency: up to 98%
Certifications: CE, IEC/EN 62040-1, IEC/EN 62040-2, IEC/EN 62040-3
Warranty: 3 years (electronics), 2 years (battery)
The Eaton 5P 650iR Gen 2 Netpack (5P650IRNG2) is a single-phase line-interactive UPS from the 5P series (2nd generation) for small to medium-sized IT environments, network components, servers, storage systems, VoIP phones, and POS systems. It offers an apparent power of 650 VA and a real power of 520 W at an output voltage of 230 V (adjustable from 200 to 240 V). The device is designed as a 1U rack-mount UPS and is installed in a 19-inch rack.
The UPS operates line-interactively and provides a pure sine wave at the output. The automatic voltage regulation (AVR) compensates for under- and over-voltages without switching to battery operation, and protects connected devices from voltage spikes, mains disturbances, and power outages. In high-efficiency mode, it achieves an efficiency of up to 98%.
The 5P650IRNG2 offers four IEC C13 output sockets as well as a C14 input and comes with a pre-installed network card (Netpack) for SNMP and web management; in addition, it features USB and serial interfaces (RS-232). With the Eaton Intelligent Power Manager (IPM) or Intelligent Power Protector software, connected systems are safely shut down during prolonged power outages. The batteries can be replaced by the user during operation.
Product series: Eaton 5P Gen2
Model: 5P650IRNG2 (Netpack)
Product type: Line-interactive UPS (rack, 1U) with network card
Power: 650 VA / 520 W
Rated output voltage: 230 V (configurable 200/208/220/230/240 V)
Waveform: Pure sine wave
Automatic Voltage Regulation (AVR): Yes
Output connections: 4 × IEC 320 C13 (2 switchable groups)
Input voltage range: 160–294 V (adjustable 150–294 V)
Input frequency: 50/60 Hz
Input connection: IEC 320 C14
Batteries: 2 × 6 V / 9 Ah, lead-acid (VRLA), maintenance-free
Hot-swappable battery: Yes
Battery management: Eaton ABM
Typical battery life: 3 to 5 years
Interfaces:
- USB (HID-compatible)
- RS-232 (serial)
- Network card pre-installed (Web, SNMP)
- Remote ON/OFF and remote power off (terminal block), relay outputs
Management software: Eaton Intelligent Power Manager (IPM), Intelligent Power Protector (IPP)
Display: Graphic LCD with energy metering
Form factor: Rackmount, 1U
Dimensions (H × W × D): approx. 43 × 438 × 361 mm
Weight: approx. 8.7 kg
Operating temperature: 0 °C to 40 °C
Relative humidity: 0% to 90%, non-condensing
Efficiency: up to 98%
Certifications: CE, IEC/EN 62040-1, IEC/EN 62040-2, IEC/EN 62040-3
Warranty: 3 years (electronics), 2 years (battery)
Eaton 5P 650iR Gen 2 Netpack – 650 VA / 520 W Line-Interactive UPS, 1U Rackmount with Network Management Card
- Regular price
- 741,99 €
- Sale price
- 741,99 €
- Regular price
-
Couldn't load pickup availability