Product information
The Eaton 5P 650iR Gen 2 (5P650IRG2) is a single-phase line-interactive UPS from the 5P series (2nd generation) for small to medium-sized IT environments, network components, servers, storage systems, VoIP phones, and point-of-sale systems. It offers an apparent power of 650 VA and a real power of 520 W at an output voltage of 230 V (adjustable from 200 to 240 V). The device is designed as a 1U rack-mount UPS and is installed in a 19-inch rack.
The UPS operates line-interactively and provides a pure sine wave at the output. The automatic voltage regulation (AVR) compensates for under- and over-voltages without switching to battery operation, and protects connected devices from voltage spikes, mains disturbances, and power outages. In high-efficiency mode, it achieves an efficiency of up to 98%.
The 5P650IRG2 offers four IEC C13 output outlets as well as a C14 input and features a graphic LCD display, USB and serial interface (RS-232), and a communication slot for an optional network card. With the Eaton Intelligent Power Manager (IPM) or Intelligent Power Protector software, connected systems are safely shut down during extended power outages. The batteries can be replaced by the user during operation.
Product series: Eaton 5P Gen2
Model: 5P650IRG2
Product type: Line-interactive UPS (rack, 1U)
Power: 650 VA / 520 W
Nominal output voltage: 230 V (configurable 200/208/220/230/240 V)
Output frequency: 50/60 Hz
Waveform: Pure sine wave
Automatic Voltage Regulation (AVR): Yes
Output connections: 4 × IEC 320 C13 (2 switchable groups)
Input voltage range: 160–294 V (adjustable 150–294 V)
Input frequency: 50/60 Hz
Input connection: IEC 320 C14
Battery type: Lead-acid (VRLA), maintenance-free
Batteries: 2 × 6 V / 9 Ah
Hot-swappable battery: Yes
Battery management: Eaton ABM
Extendable runtime: No
Typical battery life: 3 to 5 years
Interfaces:
- USB (HID-compatible)
- RS-232 (serial)
- Communication slot (mini slot) for optional network card (e.g., Eaton Network-M3)
- Remote ON/OFF and remote power off (terminal block)
- Relay outputs
Management software: Eaton Intelligent Power Manager (IPM), Intelligent Power Protector (IPP)
Display: LCD
Form factor: Rackmount, 1U
Dimensions (H × W × D): approx. 43 × 438 × 361 mm
Weight: approx. 8.6 kg
Operating temperature: 0 °C to 40 °C
Relative humidity: 0% to 90%, non-condensing
Maximum operating altitude: 3,000 m
Certifications: CE, IEC/EN 62040-1, IEC/EN 62040-2, IEC/EN 62040-3
Warranty: 3 years (electronics), 2 years (battery)
The Eaton 5P 650iR Gen 2 (5P650IRG2) is a single-phase line-interactive UPS from the 5P series (2nd generation) for small to medium-sized IT environments, network components, servers, storage systems, VoIP phones, and point-of-sale systems. It offers an apparent power of 650 VA and a real power of 520 W at an output voltage of 230 V (adjustable from 200 to 240 V). The device is designed as a 1U rack-mount UPS and is installed in a 19-inch rack.
The UPS operates line-interactively and provides a pure sine wave at the output. The automatic voltage regulation (AVR) compensates for under- and over-voltages without switching to battery operation, and protects connected devices from voltage spikes, mains disturbances, and power outages. In high-efficiency mode, it achieves an efficiency of up to 98%.
The 5P650IRG2 offers four IEC C13 output outlets as well as a C14 input and features a graphic LCD display, USB and serial interface (RS-232), and a communication slot for an optional network card. With the Eaton Intelligent Power Manager (IPM) or Intelligent Power Protector software, connected systems are safely shut down during extended power outages. The batteries can be replaced by the user during operation.
Product series: Eaton 5P Gen2
Model: 5P650IRG2
Product type: Line-interactive UPS (rack, 1U)
Power: 650 VA / 520 W
Nominal output voltage: 230 V (configurable 200/208/220/230/240 V)
Output frequency: 50/60 Hz
Waveform: Pure sine wave
Automatic Voltage Regulation (AVR): Yes
Output connections: 4 × IEC 320 C13 (2 switchable groups)
Input voltage range: 160–294 V (adjustable 150–294 V)
Input frequency: 50/60 Hz
Input connection: IEC 320 C14
Battery type: Lead-acid (VRLA), maintenance-free
Batteries: 2 × 6 V / 9 Ah
Hot-swappable battery: Yes
Battery management: Eaton ABM
Extendable runtime: No
Typical battery life: 3 to 5 years
Interfaces:
- USB (HID-compatible)
- RS-232 (serial)
- Communication slot (mini slot) for optional network card (e.g., Eaton Network-M3)
- Remote ON/OFF and remote power off (terminal block)
- Relay outputs
Management software: Eaton Intelligent Power Manager (IPM), Intelligent Power Protector (IPP)
Display: LCD
Form factor: Rackmount, 1U
Dimensions (H × W × D): approx. 43 × 438 × 361 mm
Weight: approx. 8.6 kg
Operating temperature: 0 °C to 40 °C
Relative humidity: 0% to 90%, non-condensing
Maximum operating altitude: 3,000 m
Certifications: CE, IEC/EN 62040-1, IEC/EN 62040-2, IEC/EN 62040-3
Warranty: 3 years (electronics), 2 years (battery)
Eaton 5P 650iR Gen 2 – 650 VA / 520 W Line-Interactive UPS, 1U Rackmount
- Regular price
- 499,99 €
- Sale price
- 499,99 €
- Regular price
-
Couldn't load pickup availability