Product information
The Cisco Catalyst 9300 C9300-24P-E is a modular enterprise access switch with 24 Gigabit Ethernet PoE+ ports for campus networks, corporate sites, and branch offices. It runs Cisco IOS XE and comes with the Network Essentials license level.
All 24 RJ45 ports support 10/100/1000BASE-T as well as IEEE 802.3af/at PoE/PoE+ for powering access points, VoIP phones, IP cameras, and IoT devices. A modular network module slot enables flexible uplink configurations. In addition, the switch supports StackWise-480 for data stacking and StackPower for shared or redundant power supply within a stack.
Product Series: Cisco Catalyst 9300 Series
Model: Catalyst 9300 24-Port PoE+ Network Essentials
Order Number: C9300-24P-E
GTIN/EAN: 0889728035774 / 889728035774
Product Type: Managed Layer 3 Access Switch, Modular, Rack-Mount, 1U
Software and License:
- Operating System: Cisco IOS XE
- License Level: Network Essentials
- DNA License Level: DNA Essentials
- Layer 2 and Layer 3 Access Features: Yes
- Advanced Routing/Automation Features: Dependent on License,
IOS-XE Version, and DNA Subscription
Ports:
- 24 × 10/100/1000BASE-T RJ45
- 24 × PoE+ (IEEE 802.3af/at)
- Maximum Power per PoE+ Port: 30 W
- Dedicated Management Port: 1 × 10/100/1000BASE-T RJ45
- Console Port: 1 × RJ45
- USB-C Console Port: 1 × USB-C
- USB Type-A Port: 1 × USB 3.0
- Uplink Ports: via Optional/Modular Network Module
- Network Module Slot: 1 × Cisco Catalyst 9300 NM Slot
Supported Network Modules:
- C9300-NM-2Y: 2 × 25GbE SFP28
- C9300-NM-4G: 4 × 1GbE SFP
- C9300-NM-8X: 8 × 1/10GbE SFP/SFP+
- C9300-NM-2Q: 2 × 40GbE QSFP+
- Compatibility Dependent on IOS-XE Version and Platform Release
PoE:
- PoE Standards: IEEE 802.3af and IEEE 802.3at
- PoE: Yes
- PoE+: Yes
- Cisco UPOE: No
- Cisco UPOE+: No
- Maximum Power per Port: 30 W
- PoE Budget: Dependent on Power Supply Configuration
- Standard Power Supply: 715 W AC
- Typical Available PoE Budget: Approx. 445 W
- PoE Budget with Additional 715 W Power Supply: Up to Approx. 790 W
- PoE Budget with 1,100 W Power Supply: Up to Approx. 880 W
- PoE Budget with Two 1,100 W Power Supplies: Up to Approx. 1,440 W
Performance:
- Switching Capacity: Up to 208 Gbit/s
- Forwarding Rate: Up to 154.76 Mpps
- Jumbo Frames: Up to 9,198 Bytes
- MAC Address Table: Up to 32,000 Entries
- IPv4 Routes: Up to 32,000 Entries
- IPv6 Routes: Up to 16,000 Entries
Stacking:
- Data Stacking: Cisco StackWise-480
- Maximum Stacking Bandwidth: 480 Gbit/s
- Maximum Stack Size: 8 Switches
- Stacking Topology: Ring or Chain
- Recommended: Redundant Ring Topology
- StackPower: Yes
- Power Supply Sharing in Stack: Yes
- Stateful Switchover: Yes
Layer 2 Features:
- VLANs: IEEE 802.1Q
- VLAN IDs: Up to 4,094
- Link Aggregation: LACP / IEEE 802.3ad
- Spanning Tree: STP, RSTP, MST
- LLDP and LLDP-MED: Yes
- IGMP Snooping: Yes
- MLD Snooping: Yes
- Port Mirroring: Yes
- Storm Control: Yes
- Loop Guard: Yes
Layer 3 Features:
- IPv4 and IPv6 Routing: Yes
- Static Routing: Yes
- RIP and RIPng: Yes
- OSPF: Dependent on License and Software
- EIGRP: Dependent on License and Software
- BGP: Dependent on License and Software
- VRRP: Dependent on License and Software
- Multicast Routing: Dependent on License and Software
- DHCP Relay: Yes
Security:
- IEEE 802.1X: Yes
- MAC Authentication Bypass: Yes
- RADIUS and TACACS+: Yes
- IPv4/IPv6 ACLs: Yes
- DHCP Snooping: Yes
- Dynamic ARP Inspection: Yes
- IP Source Guard: Yes
- Port Security: Yes
- Control Plane Policing: Yes
- Trustworthy Systems / Secure Boot: Yes
- MACsec: Dependent on Model, Uplink Module, and License
Management:
- Cisco IOS XE CLI: Yes
- Web User Interface: Yes
- SNMP: v1, v2c, and v3
- NETCONF/RESTCONF: Yes
- REST API: Yes
- YANG Models: Yes
- Cisco DNA Center / Catalyst Center: Yes
- Cisco DNA Spaces: Yes
- Zero Touch Provisioning: Yes
- Plug and Play: Yes
- Telemetry: Yes
- Syslog: Yes
- NetFlow Lite / Flexible NetFlow: Yes, Dependent on License
Hardware:
- Power Supply Slots: 2
- Power Supplies: Hot-Swappable
- Fan Modules: Hot-Swappable
- Redundant Power Supply: Yes
- Redundant Fans: Yes
Power Supply:
- Supported Power Supplies: Cisco PWR-C1 Series
- Input Voltage: Dependent on Installed Power Supply
- Maximum Power Consumption: Dependent on PoE Budget,
Power Supplies, and Connected Devices
Dimensions:
- Height: 4.45 cm (1U)
- Width: 44.5 cm
- Depth: Approx. 44.5 cm
- Weight: Approx. 7.4 kg
Environment:
- Operating Temperature: -5 °C to 45 °C
- Storage Temperature: -40 °C to 70 °C
- Relative Humidity: 5% to 90%, Non-Condensing
- Operating Altitude: Up to 3,000 m
The Cisco Catalyst 9300 C9300-24P-E is a modular enterprise access switch with 24 Gigabit Ethernet PoE+ ports for campus networks, corporate sites, and branch offices. It runs Cisco IOS XE and comes with the Network Essentials license level.
All 24 RJ45 ports support 10/100/1000BASE-T as well as IEEE 802.3af/at PoE/PoE+ for powering access points, VoIP phones, IP cameras, and IoT devices. A modular network module slot enables flexible uplink configurations. In addition, the switch supports StackWise-480 for data stacking and StackPower for shared or redundant power supply within a stack.
Product Series: Cisco Catalyst 9300 Series
Model: Catalyst 9300 24-Port PoE+ Network Essentials
Order Number: C9300-24P-E
GTIN/EAN: 0889728035774 / 889728035774
Product Type: Managed Layer 3 Access Switch, Modular, Rack-Mount, 1U
Software and License:
- Operating System: Cisco IOS XE
- License Level: Network Essentials
- DNA License Level: DNA Essentials
- Layer 2 and Layer 3 Access Features: Yes
- Advanced Routing/Automation Features: Dependent on License,
IOS-XE Version, and DNA Subscription
Ports:
- 24 × 10/100/1000BASE-T RJ45
- 24 × PoE+ (IEEE 802.3af/at)
- Maximum Power per PoE+ Port: 30 W
- Dedicated Management Port: 1 × 10/100/1000BASE-T RJ45
- Console Port: 1 × RJ45
- USB-C Console Port: 1 × USB-C
- USB Type-A Port: 1 × USB 3.0
- Uplink Ports: via Optional/Modular Network Module
- Network Module Slot: 1 × Cisco Catalyst 9300 NM Slot
Supported Network Modules:
- C9300-NM-2Y: 2 × 25GbE SFP28
- C9300-NM-4G: 4 × 1GbE SFP
- C9300-NM-8X: 8 × 1/10GbE SFP/SFP+
- C9300-NM-2Q: 2 × 40GbE QSFP+
- Compatibility Dependent on IOS-XE Version and Platform Release
PoE:
- PoE Standards: IEEE 802.3af and IEEE 802.3at
- PoE: Yes
- PoE+: Yes
- Cisco UPOE: No
- Cisco UPOE+: No
- Maximum Power per Port: 30 W
- PoE Budget: Dependent on Power Supply Configuration
- Standard Power Supply: 715 W AC
- Typical Available PoE Budget: Approx. 445 W
- PoE Budget with Additional 715 W Power Supply: Up to Approx. 790 W
- PoE Budget with 1,100 W Power Supply: Up to Approx. 880 W
- PoE Budget with Two 1,100 W Power Supplies: Up to Approx. 1,440 W
Performance:
- Switching Capacity: Up to 208 Gbit/s
- Forwarding Rate: Up to 154.76 Mpps
- Jumbo Frames: Up to 9,198 Bytes
- MAC Address Table: Up to 32,000 Entries
- IPv4 Routes: Up to 32,000 Entries
- IPv6 Routes: Up to 16,000 Entries
Stacking:
- Data Stacking: Cisco StackWise-480
- Maximum Stacking Bandwidth: 480 Gbit/s
- Maximum Stack Size: 8 Switches
- Stacking Topology: Ring or Chain
- Recommended: Redundant Ring Topology
- StackPower: Yes
- Power Supply Sharing in Stack: Yes
- Stateful Switchover: Yes
Layer 2 Features:
- VLANs: IEEE 802.1Q
- VLAN IDs: Up to 4,094
- Link Aggregation: LACP / IEEE 802.3ad
- Spanning Tree: STP, RSTP, MST
- LLDP and LLDP-MED: Yes
- IGMP Snooping: Yes
- MLD Snooping: Yes
- Port Mirroring: Yes
- Storm Control: Yes
- Loop Guard: Yes
Layer 3 Features:
- IPv4 and IPv6 Routing: Yes
- Static Routing: Yes
- RIP and RIPng: Yes
- OSPF: Dependent on License and Software
- EIGRP: Dependent on License and Software
- BGP: Dependent on License and Software
- VRRP: Dependent on License and Software
- Multicast Routing: Dependent on License and Software
- DHCP Relay: Yes
Security:
- IEEE 802.1X: Yes
- MAC Authentication Bypass: Yes
- RADIUS and TACACS+: Yes
- IPv4/IPv6 ACLs: Yes
- DHCP Snooping: Yes
- Dynamic ARP Inspection: Yes
- IP Source Guard: Yes
- Port Security: Yes
- Control Plane Policing: Yes
- Trustworthy Systems / Secure Boot: Yes
- MACsec: Dependent on Model, Uplink Module, and License
Management:
- Cisco IOS XE CLI: Yes
- Web User Interface: Yes
- SNMP: v1, v2c, and v3
- NETCONF/RESTCONF: Yes
- REST API: Yes
- YANG Models: Yes
- Cisco DNA Center / Catalyst Center: Yes
- Cisco DNA Spaces: Yes
- Zero Touch Provisioning: Yes
- Plug and Play: Yes
- Telemetry: Yes
- Syslog: Yes
- NetFlow Lite / Flexible NetFlow: Yes, Dependent on License
Hardware:
- Power Supply Slots: 2
- Power Supplies: Hot-Swappable
- Fan Modules: Hot-Swappable
- Redundant Power Supply: Yes
- Redundant Fans: Yes
Power Supply:
- Supported Power Supplies: Cisco PWR-C1 Series
- Input Voltage: Dependent on Installed Power Supply
- Maximum Power Consumption: Dependent on PoE Budget,
Power Supplies, and Connected Devices
Dimensions:
- Height: 4.45 cm (1U)
- Width: 44.5 cm
- Depth: Approx. 44.5 cm
- Weight: Approx. 7.4 kg
Environment:
- Operating Temperature: -5 °C to 45 °C
- Storage Temperature: -40 °C to 70 °C
- Relative Humidity: 5% to 90%, Non-Condensing
- Operating Altitude: Up to 3,000 m
Cisco Catalyst 9300 C9300-24P-E – Managed Layer-3 Switch, 24× 1GbE PoE+, Network Essentials
- Regular price
- 4.844,99 €
- Sale price
- 4.844,99 €
- Regular price
-
Couldn't load pickup availability
