Product information
The APC NetShelter AP4423A is a single-phase automatic rack-mount Automatic Transfer Switch (ATS) for 19-inch racks that ensures uninterrupted power to critical IT equipment by seamlessly switching to a redundant secondary power source in the event of a failure or outage of the primary power source. It is designed for operation at 230 V AC with a rated current of 16 A and provides a load capacity of 3,700 VA (3,680 W).
The device features two IEC C20 inputs (primary and secondary) and provides nine output outlets: eight IEC C13 outlets (10 A) and one IEC C19 outlet (16 A). The typical transfer time is less than 10 ms, allowing connected equipment to continue operating without interruption. The AP4423A is designed as a 1U rack-mount device and can be installed horizontally in 19-inch racks.
The transfer switch features an integrated Network Management Card (NMC) for SNMP/web management, as well as interfaces for serial communication. It supports management via web UI, SNMP, CLI, Telnet, and SSH and is compatible with StruxureWare. The device is designed for use in data centers, server rooms, and network cabinets where redundant power supply is required for servers, storage systems, network components, and other critical IT equipment.
Product Series: NetShelter Rack ATS
Model: AP4423A
Product Type: Automatic Rack-Mount Automatic Transfer Switch (ATS), 1U
Rated Voltage: 230 V AC (single-phase)
Rated Current: 16 A
Load Capacity: 3,700 VA / 3,680 W
Line Frequency: 50/60 Hz
Inputs:
- 2 × IEC 60320 C20 (16 A, 2P+E)
- Primary and secondary input for redundant power supply
Outputs:
- 8 × IEC 60320 C13 (10 A, 2P+E)
- 1 × IEC 60320 C19 (16 A, 2P+E)
- Total: 9 output outlets
Transfer Time: < 10 ms (typically 8–10 ms)
Input Voltage Range: 207–253 V AC (adjustable)
Maximum Input Current: 20 A (model-dependent)
Interfaces:
- RJ-45 (serial, for local management)
- Network Management Card (NMC) for SNMP/Web management
- Supported: Web UI, SNMP, CLI, Telnet, SSH, StruxureWare
Protection Features:
- Overload protection
- Short-circuit protection
- Surge protection (model-dependent)
- Automatic transfer in the event of power failure, undervoltage, overvoltage, frequency deviation
Form Factor: Rackmount (1U)
Mounting Orientation: Horizontal
Dimensions (H × W × D): 44 × 432 × 236 mm (1.73 × 17.0 × 9.3 inches)
Weight: approx. 3.74 kg
Cable Length (Input Cable): 2.44 m
Operating Temperature: −5 °C to 45 °C
Storage Temperature: −25 °C to 65 °C
Operating Relative Humidity: 5% to 95%, non-condensing
Storage Relative Humidity: 5% to 95%, non-condensing
Maximum Operating Altitude: 3,000 m (10,000 ft)
Maximum Storage Altitude: 15,240 m (50,000 ft)
Certifications: CE, cUL listed, UL listed, EN 55022 Class A, FCC Part 15 Class A
Protection Rating: IP20 (model-dependent)
Color: Black
Warranty: 2 years (repair or replacement)
The APC NetShelter AP4423A is a single-phase automatic rack-mount Automatic Transfer Switch (ATS) for 19-inch racks that ensures uninterrupted power to critical IT equipment by seamlessly switching to a redundant secondary power source in the event of a failure or outage of the primary power source. It is designed for operation at 230 V AC with a rated current of 16 A and provides a load capacity of 3,700 VA (3,680 W).
The device features two IEC C20 inputs (primary and secondary) and provides nine output outlets: eight IEC C13 outlets (10 A) and one IEC C19 outlet (16 A). The typical transfer time is less than 10 ms, allowing connected equipment to continue operating without interruption. The AP4423A is designed as a 1U rack-mount device and can be installed horizontally in 19-inch racks.
The transfer switch features an integrated Network Management Card (NMC) for SNMP/web management, as well as interfaces for serial communication. It supports management via web UI, SNMP, CLI, Telnet, and SSH and is compatible with StruxureWare. The device is designed for use in data centers, server rooms, and network cabinets where redundant power supply is required for servers, storage systems, network components, and other critical IT equipment.
Product Series: NetShelter Rack ATS
Model: AP4423A
Product Type: Automatic Rack-Mount Automatic Transfer Switch (ATS), 1U
Rated Voltage: 230 V AC (single-phase)
Rated Current: 16 A
Load Capacity: 3,700 VA / 3,680 W
Line Frequency: 50/60 Hz
Inputs:
- 2 × IEC 60320 C20 (16 A, 2P+E)
- Primary and secondary input for redundant power supply
Outputs:
- 8 × IEC 60320 C13 (10 A, 2P+E)
- 1 × IEC 60320 C19 (16 A, 2P+E)
- Total: 9 output outlets
Transfer Time: < 10 ms (typically 8–10 ms)
Input Voltage Range: 207–253 V AC (adjustable)
Maximum Input Current: 20 A (model-dependent)
Interfaces:
- RJ-45 (serial, for local management)
- Network Management Card (NMC) for SNMP/Web management
- Supported: Web UI, SNMP, CLI, Telnet, SSH, StruxureWare
Protection Features:
- Overload protection
- Short-circuit protection
- Surge protection (model-dependent)
- Automatic transfer in the event of power failure, undervoltage, overvoltage, frequency deviation
Form Factor: Rackmount (1U)
Mounting Orientation: Horizontal
Dimensions (H × W × D): 44 × 432 × 236 mm (1.73 × 17.0 × 9.3 inches)
Weight: approx. 3.74 kg
Cable Length (Input Cable): 2.44 m
Operating Temperature: −5 °C to 45 °C
Storage Temperature: −25 °C to 65 °C
Operating Relative Humidity: 5% to 95%, non-condensing
Storage Relative Humidity: 5% to 95%, non-condensing
Maximum Operating Altitude: 3,000 m (10,000 ft)
Maximum Storage Altitude: 15,240 m (50,000 ft)
Certifications: CE, cUL listed, UL listed, EN 55022 Class A, FCC Part 15 Class A
Protection Rating: IP20 (model-dependent)
Color: Black
Warranty: 2 years (repair or replacement)
APC NetShelter AP4423A – Automatic Rack Network Switch (ATS), 1U, 16 A, 230 V
- Regular price
- 1.134,99 €
- Sale price
- 1.134,99 €
- Regular price
-
Couldn't load pickup availability